Navigation

    VEYE IMAGING Forum

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc
    1. Home
    2. nimadibaj
    3. Posts
    N
    • Profile
    • Following 0
    • Followers 0
    • Topics 3
    • Posts 5
    • Best 0
    • Groups 0

    Posts made by nimadibaj

    • Veye imx462 comnands

      Hi,
      I'm trying to config veye_mipi_imx462.
      FPGA => IMX462 (via I2C)
      I had extracted i2c command list from your script.
      This is a part from my command list:
      I2C_ADDR ==>> 0x3b
      //=========================
      read_devid :
      read 0x3b 0x01
      //=========================

      read_releasedate :
      write 0x3b 0x10 0xDA
      write 0x3b 0x11 0x5C
      write 0x3b 0x13 0x01
      sleep 0.01
      yy= read 0x3b 0x14

      write 0x3b  0x10 0xDA
      write 0x3b  0x11 0x5D
      write 0x3b  0x13 0x01
      sleep 0.01
      mm= read 0x3b 0x14 );
      
      write 0x3b  0x10 0xDA
      write 0x3b  0x11 0x52
      write 0x3b  0x13 0x01
      sleep 0.01
      dd= read 0x3b  0x14
      

      //=========================
      read_hardver :

      hardver= read 0x3b  0x00
      

      //=========================
      read_sensorid :

      sensorid_h= read 0x3b 0x20
      sensorid_l= read 0x3b 0x21
      SENSOR_ID=(((sensorid_h<<8)+sensorid_l))
      

      //=========================
      read_wdrmode :
      write 0x3b 0x10 0xDB
      write 0x3b 0x11 0x32
      write 0x3b 0x13 0x01
      sleep 0.01
      wdrmode= read 0x3b 0x14

      write_wdrmode :
      write 0x3b 0x10 0xDB
      write 0x3b 0x11 0x32
      write 0x3b 0x12 $PARAM1
      write 0x3b 0x13 0x00

      value description
      0x00 Back Light Mode OFF
      0x01 Back Light Mode ON, LOW
      0x02 Back Light Mode ON, HIGH
      0x03 DOL WDR Enable
      //=========================

      But I just can read device ID, and None of the commands work.

      Please guide me. Are the commands I wrote above wrong?

      posted in VEYE MIPI camera
      N
      nimadibaj
    • RE: VEYE-IMX462 Video Format

      @veye_xumm
      Thanks

      posted in VEYE MIPI camera
      N
      nimadibaj
    • VEYE-IMX462 Video Format

      Dear Sir/Madam,

      We are working on VEYE-MIPI-IMX462 and trying to get the video with FPGA but we couldn't receive the video as YUVY4:2:2 8bit but we receive some noisy data as RGB Video.

      1_What is the actual video format?
      2_What is the pixel-per-clock rate?
      3_What is the Line Rate of camera?
      4_Is there a sample code for XILINX FPGA to receive VEYE-MIPI-IMX462 video output?

      We would appreciate it if you could help us to receive the mentioned camera video output.

      Best Regards,

      posted in VEYE MIPI camera
      N
      nimadibaj
    • RE: Veye IMX462 I2C Address

      @nimadibaj
      In all file I can just see imx307 & 327 & CS & mv & in raspberry and Jetson DTS and ....
      Why??
      What is I2C address for veye imx462??

      posted in VEYE MIPI camera
      N
      nimadibaj
    • Veye IMX462 I2C Address

      Hi,
      I'm trying to control this cam module through I2C bus by a fpga.
      But in first step, I can not detect it!
      What is true Address of Veye imx462?
      Thanks 🙏

      posted in VEYE MIPI camera
      N
      nimadibaj