SOLVED Install camera to rpi4

Viktor

Here is rpi boot contents:

number@number:/boot$ ls
config-5.11.0-1008-raspi  dtb-5.11.0-1008-raspi  grub                          
System.map-5.11.0-1008-raspi
config.txt                
dtbs                  
initrd.img                    
vmlinuz-5.11.0-1008-raspi
dtb                       
firmware               
initrd.img-5.11.0-1008-raspi

Viktor

I tried installing veye327 to rpiOs.

I have 5.10.36 firmware. veye drivers don't have this version.

I tried build from source, but failed.
Copied built zImage and veye327.dtbo to rpi and got load kernel modules failed on startup.

Updated: i did modules_install and veye327 works on rpiOs now.

Can you help build kernel for Ubuntu Desktop Rpi?

Viktor

I did it.

crosscompile kinux image veye327 driver for Ubuntu Desktop 21.04 Rpi4

on rpi4

uname -r
5.11.0-1008-raspi

uname -a
Linux number 5.11.0-1008-raspi #8-Ubuntu SMP PREEMPT Thu May 6 17:46:38 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux

on host

sudo apt install git bc bison flex libssl-dev make libc6-dev libncurses5-dev crossbuild-essential-arm64

mkdir rpi_ubuntu_source
cd rpi_ubuntu_source

git clone --depth=1 git://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux-raspi/+git/hirsute linux

git clone https://github.com/veyeimaging/raspberrypi_v4l2.git


cp raspberrypi_v4l2/driver_source/cam_drv_src/rpi-5.x_all/veye327.c linux/drivers/media/i2c

edit linux/drivers/media/i2c/Kconfig

find section imx219 and after it add:

config VIDEO_VEYE327
	tristate "VEYE VEYE327 sensor support"
	depends on I2C && VIDEO_V4L2
	select MEDIA_CONTROLLER
	select VIDEO_V4L2_SUBDEV_API
	select V4L2_FWNODE
	help
	  This is a Video4Linux2 sensor driver for the VEYE
	  IMX327 camera.

	  To compile this driver as a module, choose M here: the
	  module will be called veye327.

edit linux/drivers/media/i2c/Makefile

find line imx219 and after it add:

obj-$(CONFIG_VIDEO_VEYE327)	+= veye327.o


cp raspberrypi_v4l2/driver_source/dts/rpi-5.10.y/veye327-overlay.dts linux/arch/arm64/boot/dts/overlays

edit linux/arch/arm64/boot/dts/overlays/Makefile

find line imx219 and after it add:

veye327.dtbo \

build kernel

cd linux

KERNEL=kernel8
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bcm2711_defconfig

make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- menuconfig

go to Device Drivers --> Multimedia Support --> Media ancillary drivers --> Camera sensor devices

select veye327 and save

make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- Image modules dtbs -j4

mount sd to host

mkdir mnt
mkdir mnt/fat32
mkdir mnt/ext4
sudo mount /dev/sdd1 mnt/fat32
sudo mount /dev/sdd2 mnt/ext4

copy modules

sudo env PATH=$PATH make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- INSTALL_MOD_PATH=mnt/ext4 modules_install

copy kernel and dtb

sudo cp mnt/fat32/vmlinuz mnt/fat32/vmlinuz.old
sudo cp arch/arm64/boot/Image mnt/fat32/vmlinuz
sudo cp arch/arm64/boot/dts/broadcom/*.dtb mnt/fat32/
sudo cp arch/arm64/boot/dts/overlays/*.dtb* mnt/fat32/overlays/
sudo cp arch/arm64/boot/dts/overlays/README mnt/fat32/overlays/
sudo umount mnt/fat32
sudo umount mnt/ext4

on rpi4

edit /boot/firmware/config.txt

add lines

gpu_mem=400
dtparam=i2c_vc=on
cma=128M
dtoverlay=veye327.dtbo
start_x=1

sudo reboot

dmesg | grep veye

veye327 probed

preview

gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! autovideosink sync=false text-overlay=false -v

success

Viktor

Add to /etc/modules

i2c-dev

i2c bus 10,11 for sensor control

veye_xumm

@viktor
Great! Thank you for trying and sharing.

Viktor

fire

@viktor
Thanks very much.
I wonder how did you set camera parameters, I found that the cs_mipi_i2c.sh not working.

Viktor

@fire Veye327 i2c fully works.

fire

@viktor
Can you use the original pi commands (e.g. raspistill raspivid), instead of using gst-launch?

Viktor

@fire Yes, raspivid and raspistill works too on Ubuntu.