VEYE IMAGING Forum
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc
    • Register
    • Login

    jetson nano 2GB无法识别相机 MV-MIPI-IMX264M

    Scheduled Pinned Locked Moved Jetson App Software
    39 Posts 2 Posters 21.2k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • veye_xummV Offline
      veye_xumm @hmj
      last edited by

      @hmj https://wiki.veye.cc/index.php/Mv_mipi_i2c.sh_user_guide
      参考这个页面，把trigger相关的参数读出来一下，发给我看看。
      trgnum
      trginterval
      trgdelay
      trgedge
      trgfilter_enable
      trgfilter_time
      trgexp_delay
      trgcount

      Questions will be answered as soon as possible, please be patient.
      如果你使用中文，请直接用中文提问。
      May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

      H 1 Reply Last reply Reply Quote 0
      • H Offline
        hmj @veye_xumm
        last edited by

        @veye_xumm said in jetson nano 2GB无法识别相机 MV-MIPI-IMX264M:

        trgcount

        pt@dpt-desktop:./mv_mipi_i2c.sh -r -f version
        version is C 01.34 and L 02.00
        dpt@dpt-desktop: ./mv_mipi_i2c.sh -r -f trgnum
        r trigger num is 1
        dpt@dpt-desktop: ./mv_mipi_i2c.sh -r -f trginterval
        r trginterval is 0
        dpt@dpt-desktop:./mv_mipi_i2c.sh -r -f trgdelay
        r trgdelay is 0
        dpt@dpt-desktop:./mv_mipi_i2c.sh -r -f trgedge
        r trg edge is 0
        dpt@dpt-desktop: ./mv_mipi_i2c.sh -r -f trgfilter_enable
        r trgfilter enable is 0
        dpt@dpt-desktop: ./mv_mipi_i2c.sh -r -f trgfilter_time
        r trgfilter time is 1 us
        dpt@dpt-desktop:./mv_mipi_i2c.sh -r -f trgexp_delay
        r trigger exposure delay is 0 us
        dpt@dpt-desktop:./mv_mipi_i2c.sh -r -f trgcount
        r trigger count 156, trigger lost 0

        veye_xummV 1 Reply Last reply Reply Quote 0
        • veye_xummV Offline
          veye_xumm @hmj
          last edited by

          @hmj 你现在读取一下fps和maxfps，分别是多少？

          Questions will be answered as soon as possible, please be patient.
          如果你使用中文，请直接用中文提问。
          May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

          H 2 Replies Last reply Reply Quote 0
          • H Offline
            hmj @veye_xumm
            last edited by

            @veye_xumm
            ./mv_mipi_i2c.sh -r -f maxfps
            r maxfps @ current setting is 35.84 fps
            ./mv_mipi_i2c.sh -r -f fps
            r fps is 30.00 fps

            veye_xummV 1 Reply Last reply Reply Quote 0
            • veye_xummV Offline
              veye_xumm @hmj
              last edited by

              @hmj
              这是问题所在了。
              虽然是触发模式，但是实际生效的帧率还是fps这个参数，maxfps永远只是最大能力的一个提示而已。
              那么你之前

              @hmj said in jetson nano 2GB无法识别相机 MV-MIPI-IMX264M:

              查询GET_FPS,帧率大约为38.84,那么帧周期为27902,

              这个地方的帧周期计算，应该使用fps来算。 这个fps不仅影响着camera真正的运作时序，也影响着最大可设的曝光时间。
              建议你：

              ./mv_mipi_i2c.sh -w -f fps -p1 40 -b [bus]
./mv_mipi_i2c.sh -r -f fps -b [bus]

              这样，就把相机设置到了当前roi下最大帧率。
              应该就没问题了。

              Questions will be answered as soon as possible, please be patient.
              如果你使用中文，请直接用中文提问。
              May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

              H 1 Reply Last reply Reply Quote 0
              • H Offline
                hmj @veye_xumm
                last edited by

                @veye_xumm
                感谢,问题解决~

                veye_xummV 1 Reply Last reply Reply Quote 0
                • veye_xummV Offline
                  veye_xumm @hmj
                  last edited by

                  @hmj 不客气

                  Questions will be answered as soon as possible, please be patient.
                  如果你使用中文，请直接用中文提问。
                  May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                  1 Reply Last reply Reply Quote 0
                  • H Offline
                    hmj @veye_xumm
                    last edited by

                    @veye_xumm
                    我们现在基本测试已经通过,现在有个棘手的问题,由于jetson nano的mipi驱动在kernel image中,我目前的做法是直接替换官方的.

                    我们目前项目中添加了许多其他功能, 因此修改了内核的许多地方.所以为了替换之前的老相机,必须拿到你们kenrel源码和DTS, 再整合进我们目前的内核中,才能无缝完成项目的迁移.

                    veye_xummV 1 Reply Last reply Reply Quote 0
                    • veye_xummV Offline
                      veye_xumm @hmj
                      last edited by

                      @hmj 请参考下面这个链接
                      https://wiki.veye.cc/index.php/VEYE_CS_Camera_source_for_Jetson/zh

                      Questions will be answered as soon as possible, please be patient.
                      如果你使用中文，请直接用中文提问。
                      May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                      H 1 Reply Last reply Reply Quote 0
                      • H Offline
                        hmj @veye_xumm
                        last edited by

                        @veye_xumm
                        相机有没有调节对比度的api, 我们目前发现图片在拍黑白图案(相机标定)时候,图片质量没有国外相机明显.

                        veye_xummV 1 Reply Last reply Reply Quote 0
                        • veye_xummV Offline
                          veye_xumm @hmj
                          last edited by

                          @hmj 您可以通过调节gamma，或者自定义lut曲线达到这种高对比度效果。

                          Questions will be answered as soon as possible, please be patient.
                          如果你使用中文，请直接用中文提问。
                          May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                          H 1 Reply Last reply Reply Quote 0
                          • H Offline
                            hmj @veye_xumm
                            last edited by hmj

                            @veye_xumm said in jetson nano 2GB无法识别相机 MV-MIPI-IMX264M:

                            gamma

                            gamma设置不需要对相机做关闭操作吧,只要在不拍照的时刻进行配置即可?
                            lut的文件,请问这个文件怎么 修改

                            veye_xummV 1 Reply Last reply Reply Quote 0
                            • veye_xummV Offline
                              veye_xumm @hmj
                              last edited by

                              @hmj
                              gamma随时可配。
                              lut适用于比较专业的客户特殊要求场景下，你可以先试试gamma。

                              Questions will be answered as soon as possible, please be patient.
                              如果你使用中文，请直接用中文提问。
                              May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                              H 1 Reply Last reply Reply Quote 0
                              • H Offline
                                hmj @veye_xumm
                                last edited by

                                @veye_xumm
                                我们买的一款相机现在不出图了,排除了其他原因,应该和相机相关. 从dmesg中可以看到如下log

                                [ 33.578643] mvcam 7-003b: camera_common_mclk_enable: no device power rail
                                [ 34.087223] mvcam 7-003b: camera_common_mclk_disable: no device power rail
                                [ 34.094119] mvcam 8-003b: camera_common_mclk_enable: no device power rail
                                [ 34.602642] mvcam 8-003b: camera_common_mclk_disable: no device power rail
                                [ 34.609562] mvcam 7-003b: camera_common_mclk_enable: no device power rail

                                这是啥问题?

                                veye_xummV 1 Reply Last reply Reply Quote 0
                                • veye_xummV Offline
                                  veye_xumm @hmj
                                  last edited by

                                  @hmj
                                  这个提示是没有关系的。不影响。
                                  你查看一下配置，是否配置为触发模式了？
                                  可以尝试恢复一下出厂默认值试试，factoryparam

                                  Questions will be answered as soon as possible, please be patient.
                                  如果你使用中文，请直接用中文提问。
                                  May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                                  H 1 Reply Last reply Reply Quote 0
                                  • H Offline
                                    hmj @veye_xumm
                                    last edited by

                                    @veye_xumm
                                    问题是程序没改动过, 以前二个月里都没动过,也能跑出图,就昨天开始就不行了
                                    触发模式一直是外触发, 外触发信号也是合乎要求.
                                    相机设置应该也是断电不保存的.

                                    出厂值后,出现如下错误
                                    [ 57.016386] mvcam 7-003b: camera_common_mclk_enable: no device power rail
                                    [ 57.525021] mvcam 7-003b: camera_common_mclk_disable: no device power rail
                                    [ 57.531930] mvcam 8-003b: camera_common_mclk_enable: no device power rail
                                    [ 58.040414] mvcam 8-003b: camera_common_mclk_disable: no device power rail
                                    [ 58.047311] mvcam 7-003b: camera_common_mclk_enable: no device power rail
                                    [ 58.555198] mvcam 7-003b: csi2_try format
                                    [ 58.555205] mvcam 7-003b: mvcam_csi2_get_fmt_idx_by_code success
                                    [ 58.613896] video4linux video0: tegra_channel_s_ctrl: 10100856 set vi timeout disable 1

                                    veye_xummV 1 Reply Last reply Reply Quote 0
                                    • veye_xummV Offline
                                      veye_xumm @hmj
                                      last edited by

                                      @hmj

                                      @hmj said in jetson nano 2GB无法识别相机 MV-MIPI-IMX264M:

                                      出厂值后,出现如下错误
                                      [ 57.016386] mvcam 7-003b: camera_common_mclk_enable: no device power rail
                                      [ 57.525021] mvcam 7-003b: camera_common_mclk_disable: no device power rail
                                      [ 57.531930] mvcam 8-003b: camera_common_mclk_enable: no device power rail
                                      [ 58.040414] mvcam 8-003b: camera_common_mclk_disable: no device power rail
                                      [ 58.047311] mvcam 7-003b: camera_common_mclk_enable: no device power rail
                                      [ 58.555198] mvcam 7-003b: csi2_try format
                                      [ 58.555205] mvcam 7-003b: mvcam_csi2_get_fmt_idx_by_code success
                                      [ 58.613896] video4linux video0: tegra_channel_s_ctrl: 10100856 set vi timeout disable 1

                                      看起来这个没有错误。 不过你的程序好像给配置成了触发模式。
                                      相机的参数是可以保存的，只要你通过脚本调用一下paramsave。
                                      我的建议是你把摄像头恢复默认值——这样也就恢复为了图像流模式。
                                      不要运行你的现在的程序——配置为触发啊之类的。
                                      然后用qv4l2程序来取图看看。

                                      Questions will be answered as soon as possible, please be patient.
                                      如果你使用中文，请直接用中文提问。
                                      May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                                      1 Reply Last reply Reply Quote 0

                                      Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                      Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                      With your input, this post could be even better 💗

                                      Register Login
                                      • First post
                                        Last post