saturation, contrast, shutter speed, iso on VEYE-MIPI-462

veye_xumm

@watchever This is not open for the time being, sorry.

veye_xumm

@watchever
yes

veye_xumm

@watchever

As PiCamera is a python package that fully rely on MMAL, do you know if it can work with your VEYE-IMX462 camera ?

I think it could not work.

watchever

@veye_xumm, thanks for answer. Is there any possibility to set camera params by using a structure from libdmipicam.so rather than using shell script.

Thanks

veye_xumm

@watchever
We do not provide such an interface for the time being. This shell script actually calls the i2C read-write function implemented by the C language. It's all open source.
It should be able to implement the method you are talking about.

watchever

@veye_xumm,
Ok I am going to implement this in C language.
However do you know if there is a guide regarding the registers of the VEYE module on I2C, possible values and what they are doing.

I see that there are common steps to set value using registers 0x10, 0x11, 0x12, 0x13, but not clear for me.

Thanks for your help

watchever

And you confirm that this shell script works with the VEYE-MIPI-IMX462 module ?

veye_xumm

@watchever

And you confirm that this shell script works with the VEYE-MIPI-IMX462 module ?

yes.

watchever

This post is deleted!

watchever

This post is deleted!

watchever

@veye_xumm, I see lot of methods in RaspiCamControl.c file that seem to control contrast (raspicamcontrol_set_contrast), saturation and lot of others parameters for the camera.
Can I use them to set VEYE_MIPI_IMX462 parameters rather than using I2C shell scripts ? It would be more convenient.

Thanks for your help

veye_xumm

@watchever said in saturation, contrast, shutter speed, iso on VEYE-MIPI-462:

RaspiCamControl

Hi，
I think it could not work.
RaspiCamControl.c control the isp moudle inside RPI, while VEYE camera use ISP outside RPI.

watchever

Thanks for your reply. Can you also tell me if you have some help regarding the I2C registers of the camera. The VEYE shell script is well documented for value of register 0x12 but nothing about 0x10, 0x11 and 0x13 registers and values.

veye_xumm

@watchever
There are multiple modules inside the camera, and these registers are set to access multiple modules through an i2C address.
Customers need to strictly follow the function of the shell script to access a full function.

watchever

Sorry again for all this questions and thanks a lot for your great help. My last question is regarding the picture format. Is RGB format available ?
I add a IMAGE_ENCODING_RGB FOURCC('R', 'G', 'B', '') in D_mipicam.h . So if I create an IMAGE_FORMAT with this value for encoding member, will it be enough ?