@otca The camera is now successfully probed, which confirms that both the I2C and the enable pin are functioning correctly. The current issue indicates that the I2C control channel is working, but the MIPI CSI data channel is not. Please verify whether the MIPI CSI interface pin assignment on this carrier board matches that of the official Orin NX development board. The Device Tree Source (DTS) should be adjusted accordingly to match the carrier board.

@veye_xumm Thanks my problem is solved.

@mv For third-party carrier boards on the Orin Nano or Orin NX platform, we have indeed encountered issues with MIPI signal transmission quality. There isn't a good solution at the moment, so we recommend switching to an official NVIDIA board.

@otca I will continue discussing that issue with you in the other post.