SOLVED Camera sync mode

[g-towboat]

@veye_xumm
Hi here is my drawing:

Red: the jumpers
Green: the two black delivered wires

Following cameras showing this kind of image:

Camera 1 /dev/video0 image ok
Camera 2 /dev/video1 blue image
Camera 3 /dev/video2 purple image
Camera 4 /dev/video3 image ok
Camera 5 /dev/video4 purple image
Camera 6 /dev/video5 blue image
Camera 7 /dev/video6 purple image
Camera 8 /dev/video7 blue image

[veye_xumm]

@g-towboat
I think your wire connection is ok. Do you install a lens on your camera?
I don't understand the purple image.
Please post a purple image and a blue image. let me look at it.

[g-towboat]

@veye_xumm
No special lens on the cameras - just the standard from veye
Here is an image

[veye_xumm]

@g-towboat
Hi, I think this camera has no lens mounted. Is it true ?

[g-towboat]

@veye_xumm
A lens is connected on all camera. If i switch back the configuration to "free run" on each camera, all images look normal.

[veye_xumm]

@g-towboat
Have you checked the firmware version of each camera?
http://wiki.veye.cc/index.php/CS-MIPI-IMX307_version_log

Make sure firmware version is newer than 2.33.

[g-towboat]

@veye_xumm last week i installed version 2.36

[g-towboat]

@veye_xumm sorry i forgot to upload the blue image

[veye_xumm]

@g-towboat
I am REALLY REALLY sorry. I uploaded the wrong version fpdlink3_i2c_jetson.sh before.

Please download the newest version I upload to github.
https://github.com/veyeimaging/nvidia_jetson_veye_bsp/tree/master/i2c_cmd/bin
It works fine here.
Sorry again.

[g-towboat]

@veye_xumm
i have installed the new version. it looks good for now. One question do i need to set the fpdlink-settings after each reboot?

[veye_xumm]

@g-towboat
It is really nice.

@g-towboat said in Camera sync mode:

One question do i need to set the fpdlink-settings after each reboot?

./fpdlink3_i2c_jetson.sh -f sync_init .....
This cmd need to set after each reboot.

./cs_mipi_i2c.sh -w -f streammode
The camera can save streammode.